| |
FREMO | FREMODCC | Loconet-Selbstbau | FREDI |
|---|
| Name | Ana./ Dig. |
Wert/ value |
Pack. | Beschr./Descript. | Datenblatt/ datasheet |
Lief./ Suppl. |
|---|---|---|---|---|---|---|
| Co=Conrad Fa=Farnell Re=Reichelt RS=RS-Components |
||||||
| C1 | 47µF | Elko | ||||
| C2 | 22pF | Kondensator | ||||
| C3 | 22pF | Kondensator | ||||
| C4 | 100nF | Kondensator | ||||
| C5 | 100nF | Kondensator | ||||
| C6 | 33pF | RM: 2.5mm | Kondensator | |||
| C7 | 47µF | Elko | ||||
| C8 | 10nF | Kondensator | ||||
| C9 | 10nF | Kondensator | ||||
| D1 | Diode Schottky | |||||
| D2 | Diode Schottky | |||||
| IC1 | ATMEGA8L-8 | Prozessor | ||||
| IC2 | LP 2950 CZ3.0 | TO-92 | Spannungsregler 3.0V | Re: LP 2950 ACZ3,0 |
||
| J1 | Buchse 6/6 | |||||
| LED1 | ||||||
| LED2 | ||||||
| LED3 | ||||||
| Q1 | 7.3728MHz | Quarz | ||||
| R1 | 12Ω | 1206 | Widerstand 12Ω | |||
| R10 | 4.7kΩ | Widerstand 4.7kΩ | ||||
| R11 | Poti | |||||
| R12 | 220Ω | Widerstand 220Ω | ||||
| R13 | 10kΩ | Widerstand 10kΩ | ||||
| R14 | 10kΩ | Widerstand 10kΩ | ||||
| R2 | 12Ω | 1206 | Widerstand 12Ω | |||
| R3 | 47kΩ | 1206 | Widerstand 47kΩ | |||
| R4 | 150kΩ | 1206 | Widerstand 150kΩ | |||
| R5 | 15kΩ | 1206 | Widerstand 15kΩ | |||
| R6 | 22kΩ | 1206 | Widerstand 22kΩ | |||
| R7 | 4.7kΩ | 1206 | Widerstand 4.7kΩ | |||
| R8 | 220Ω | Widerstand 220Ω | ||||
| R9 | 220Ω | Widerstand 220Ω | ||||
| S1 | Schalter | |||||
| S2 | Drehimpulsgeber | |||||
| S3 | Taster | |||||
| S4 | Taster | |||||
| S5 | Taster | |||||
| S6 | Taster | |||||
| S7 | Taster | |||||
| S8 | Taster | |||||
| S9 | Schalter | |||||
| SV1 | Buchse 6-polig | |||||
| T1 | BC337-40 | TO-92 | Transistor | Re: BC 337-40 |
| |
FREMO | FREMODCC | Loconet-Selbstbau | FREDI |  |
|---|
| Autor dieser Seite: Christian Lindecke unter Nutzung von Vorlagen von Olaf Funke, Bernhard Krimmel und anderer. | |