What are FREMO members building by themselfs?

	FREMO	FREMODCC

On this page you find do it yourself projects that replace a comercial command station by a PC with some additional hardware.

Contents

1. Wireing
2. Loconet
3. NMRA-DCC
4. Command stations
   • RKDCC
   • MiniBOX
   • Multiple command stations

• RK-DCC - Rainer Keil implements a PC program, special features: 128 speed steps, long addresses, all service modes, Loconet interface.
• PCU - This minimal TMW DCC compatible hardware is designed by Henner Meinhold and Mathias Hellmann.
• PCU2 - Improvement by Stefan Haack
• Franken-DCC-Zentrale - Oliver Spannekrebs develops a hardware in cooperation with Rainer Keil (New version available now!).
• Frankenzentrale in battery slot of a Laptop - Installation suggestion by Jens Emmermann.

• MiniBOX - simple command station with LocoNet connection for FRED and CV read/write capability.

• Why all that? - Motivation and historical development.
• Track Switch - A piece of track is assigned automatically to the right one of two command stations.
  Commercial alternative: BTM-SG from LTD
• LocoNet-Gateway - Access to all command stations siultaniously from a FRED that is plugged into the net that is near the switched track.
• Deployment in the Layout - Information for planers of big layouts.
• Set-up of the devices - Instructions for the person that has make it running.

	FREMO	FREMODCC

Author of this page: Stefan Bormann.